(shown on cabinet base)

SPECIFICATIONS

18″ wide heavy duty gas range, Vulcan Model No. VGM18 (modular) and VGM18B (cabinet base). Stainless steel front, front top ledge, burner box, sides, base, stub back and 4″ adjustable legs. 11⁄4″ diameter front gas manifold and 11⁄4″ rear gas, capped. One 30,000 BTU/hr. burner with individual pilots and controls for each burner. 3⁄4″ ground steel griddle plate with 4″ high side splashes. Total input 30,000 BTU/hr.

Exterior Dimensions:

363⁄4″d x 18″w x 401⁄2″h on 4″ adjustable legs

VGM18 18″ Wide Manual Griddle / Modular

VGM18B 18″ Wide Manual Griddle / Cabinet Base

STANDARD FEATURES

Stainless steel front, front top ledge, burner box, sides, base, and stub back
11⁄4″ diameter front gas manifold with 11⁄4″ rear gas connection (capped)
30,000 BTU/hr. burner
Individual pilots and controls for each burner
³⁄4″ ground steel griddle plate
4″ high side splash
4″ stainless steel stub riser
6″ adjustable stainless steel legs for “B” models (no legs for modular model)
Stainless steel cabinet base door
Universal rack guides, with one removable shelf (cabinet base)
One year limited parts and labor warranty

OPTIONAL FEATURES (Factory Installed) Cap and cover front manifold

4″ adjustable flanged feet for modular models

Less legs for dolly mounting of cabinet base models

3″ high toe base for curb mounting of cabinet base models Universal rack guides, with one shelf (shelf is removable)

ACCESSORIES (Packaged & Sold Separately)

3⁄4″, 1″, or 11⁄4″ gas pressure regulator (specify gas type – pack loose)

Set of 4 casters, 6″ high (two locking)

6″ adjustable flanged feet for cabinet base models

Extra removable shelves for use with Universal rack guides (cabinet base)

Banking strip

10″, 22″, or 34″ high back risers (no shelf)

22″ single deck solid or flo-thru high shelf risers 34″ double deck solid or flo-thru high shelf risers

Flexible gas hose with quick disconnect and restraining device

INSTALLATION INSTRUCTIONS

A properly sized gas pressure regulator suitable for battery or single unit application must be furnished and installed. Natural gas 6.0″ W.C., propane gas 10.0″ W.C.
An adequate ventilation system is required for commercial cooking equipment. Information may be obtained by writing to the National Fire Protection Association, 1 Batterymarch Park, Quincy, MA 02269, www.NFPA.org. When writing, refer to NFPA No. 96.
These units are manufactured for installation in accordance with ANSZ223.1A (latest edition), National Fuel Gas Code. Copies may be obtained from The American Gas Association, 400 N Capitol St. NW, Washington, DC 20001, www.AGA.org.
Clearances Rear Sides

Combustible 10″ 10″

Non-combustible 0″ 0″

For proper combustion, install equipment on adjustable legs or casters. On curb or platform, allow 31⁄2″ front overhang. Toe base with leveling bolts are required for curb installation. Specify when ordering.
Cannot be batteried with GH series equipment.
This appliance is manufactured for commercial installation only and is not intended for home use.

NOTE: In line with its policy to continually improve its product, Vulcan reserves the right to change materials and specifications without notice.

Specify type of gas when ordering. Specify altitude when above 2,000 feet.

TOP CONFIGURATION	MODEL NUMBER	DESCRIPTION	TOTAL INPUT BTU / HR	SHIPPING WEIGHT LBS / KG
	VGM18	18″ Wide Manual Griddle / Modular	30,000	220 / 100
	VGM18B	18″ Wide Manual Griddle / Cabinet Base	30,000	285 / 129