HEAVY DUTY GAS RANGE

FRENCH TOP / 18″ WIDE GAS RANGE

V1FT18 18″ French Top / Modular

Model V1FT18B

(shown on cabinet base)

V1FT18B 18″ French Top / Cabinet Base

STANDARD FEATURES

• Stainless steel front, front top ledge, burner box, sides, base, and stub back
• 11⁄4″ diameter front gas manifold with 11⁄4″ rear gas connection (capped)
• 25,000 BTU/hr. burner (2 ring burner)
• Individual pilots and controls for each burner
• Polished cast iron French Top
• 4″ stainless steel stub riser
• 6″ adjustable stainless steel legs for cabinet base units (no legs for modular model)
• Stainless steel cabinet base door
• One year limited parts and labor warranty

OPTIONAL FEATURES (Factory Installed) Cap and cover front manifold

4″ adjustable flanged feet for modular models

Less legs for dolly mounting of cabinet base models 3″ high toe base for curb mounting

Universal rack guides, with one shelf (shelf is removable)

SPECIFICATIONS

18″ wide heavy duty gas range, Vulcan Model No. V1FT18 (modular) and V1FT18B (cabinet base). Stainless steel front, sides, base, plate ledge, front top ledge with pull-out condiment rails, and stub back. 11⁄4″ diameter front gas manifold and 11⁄4″ rear gas connection, capped. Heavy polished cast iron French plate. 25,000 BTU/hr. heavy cast burner, two ring burners with individual pilots and controls for each burner. Total input 25,000 BTU/hr.

Exterior Dimensions:

363⁄4″d x 18″w x 36″h on 6″ adjustable legs

ACCESSORIES (Packaged & Sold Separately)

3⁄4″, 1″, or 11⁄4″ gas pressure regulator (specify gas type – pack loose)

Set of 4 casters, 6″ high (two locking)

6″ adjustable flanged feet for cabinet base models

Extra removable shelves for use with Universal rack guides

(cabinet base) Banking strip

10″, 22″, or 34″ high back risers (no shelf)

22″ single deck solid or flo-thru high shelf risers 34″ double deck solid or flo-thru high shelf risers

Flexible gas hose with quick disconnect and restraining device

Common condiment type, telescoping plate rails (starting at 24″ length)

Dolly frames

INSTALLATION INSTRUCTIONS

1. A properly sized gas pressure regulator suitable for battery or single unit application must be furnished and installed. Natural gas 6.0″ W.C., propane gas 10.0″ W.C.
2. An adequate ventilation system is required for commercial cooking equipment. Information may be obtained by writing to the National Fire Protection Association, 1 Batterymarch Park, Quincy, MA 02269, www.NFPA.org. When writing, refer to NFPA No. 96.
3. These units are manufactured for installation in accordance with ANSZ223.1A (latest edition), National Fuel Gas Code. Copies may be obtained from The American Gas Association, 400 N Capitol St. NW, Washington, DC 20001, www.AGA.org.
4. Clearances Rear Sides

Combustible 10″ 10″

Non-combustible 0″ 0″

1. For proper combustion, install equipment on adjustable legs or casters. On curb or platform, allow 31⁄2″ front overhang. Toe base with leveling bolts are required for curb installation. Specify when ordering.
2. Cannot be batteried with GH series equipment.
3. This appliance is manufactured for commercial installation only and is not intended for home use.

NOTE: In line with its policy to continually improve its product, Vulcan reserves the right to change materials and specifications without notice.

Specify type of gas when ordering. Specify altitude when above 2,000 feet.

TOP CONFIGURATION	MODEL NUMBER	DESCRIPTION	TOTAL INPUT BTU / HR	SHIPPING WEIGHT LBS / KG
	V1FT18	18″ French Top / Modular	25,000	220 / 110
	V1FT18B	18″ French Top / Cabinet Base	25,000	285 / 129