Touch & Go® Advance

SymbolS

	Warning		Caution
	NEVER touch moving parts. Keep hands and utensils out of container		Operate with lid and lid plug in place
	Electrical Shock Hazard		Read and understand owner’s manual
	High temperature when blending hot liquids		Do not immerse
	DO NOT insert items into the container while the blender is in use	l / O	On/Off
	Unplug while not in use, before cleaning, changing accessories or approaching parts that move while the blender is in use

Dimensions:

• 18.0 in. / 45,7 cm high with lid closed
• 24.5 in. / 62,2 cm high with lid open
• Depth: 10.7 in. / 27,2 cm with handle
• Width: 8.5 in. / 21,6 cm

Do not use extension cords with machine.

Recycling infoRmation

This product has been supplied from an environmentally aware manufacturer.

This product may contain substances that could be harmful to the environment if disposed of in places (landfills) that are not appropriate according to legislation.

The ‘crossed-out wheelie bin’ symbol is placed on this product to encourage you to recycle wherever possible.

Please be environmentally responsible and recycle this product through your recycling facility at the end of its life.

impoRtant Safe guaRdS

	WARNING
	To Avoid Injury. Read and understand the instruction manual before using this machine. Basic safety precautions should be followed, including the following.
WARNING
	Electrical Shock Hazard. ONLY use an earthed outlet. DO NOT remove the ground. DO NOT use an adaptor. DO NOT use an extension cable. Failure to follow instructions can cause death or electric shock.

READ ALL INSTRUCTIONS AND THIS MANUAL BEFORE USING THIS PRODUCT. FAILURE TO FOLLOW THE INSTRUCTIONS AND SAFETY PRECAUTIONS IN THIS MANUAL CAN RESULT IN SERIOUS INJURY OR PROPERTY DAMAGE.

1. Read all instructions.
2. To protect against risk of electrical shock, do not put motor base in water or other liquid.
3. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
4. Children should be supervised to ensure that they do not play with the appliance. Keep this appliance and it’s cord out of reach of children.
5. Unplug the power cord from the wall outlet when the Vitamix® machine is not in use, before disassembling, when putting on or taking off parts, and before cleaning, other than washing the container.
6. Never come in contact with moving parts, especially the blades.
7. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
8. Do not operate any machine that malfunctions, has a damaged cord or plug, has been dropped or is damaged in any manner. If you purchased your equipment in the U.S.A., call Vitamix Technical Support, 800-886-5235 for examination, repair, possible replacement, or electrical or mechanical adjustment. If you purchased outside of the U.S.A., please contact your local authorized Vitamix Distributor, or contact the Vitamix International Division at +1.440.782.2450 or email: international@ vitamix.com for a distributor near you.
9. Do not use attachments not recommended or sold by Vitamix. Doing so will void the warranty. Alteration or modification of this product in any form is not recommended as such may result in bodily injury.
10. Do not use outdoors.
11. Do not let the power cord touch hot surfaces or hang over edge of table or counter.
12. Be careful if hot liquid is poured into the blender as it can be ejected out of the appliance due to a sudden steaming.
13. Do not place the machine on or near a hot gas or electrical burner, in a heated oven, or allow machine to touch hot surfaces. External heat sources can damage the machine.
14. Keep hands and utensils out of container while motor is running to prevent the possibility of severe personal injury and/or damage to the Vitamix machine. A rubber spatula may be used, but only when the Vitamix machine is not running.
15. WARNING: Blades are sharp. Handle carefully.

• • Never try to remove the blades while container is sitting on the motor base.
  • Do not operate with loose, nicked or damaged blades – replace immediately.
  • To reduce the risk of personal injury, never place blade assembly on motor base without the Vitamix container properly attached.
  • Care shall be taken when handling the sharp cutting blades, emptying the bowl and during cleaning

16. The maximum capacity is equivalent to the ounces (liters) listed on the container, i.e., 48 oz. / 1.4 L, and is substantially less with thick mixtures.

17. Always operate the Vitamix machine with the lid in place and securely attached.

18. Display window area will scratch when contacted with a scouring pad or sharp object. Use a soft cloth to wipe the control panel area clean.

19. The machine cannot be cleaned with a water jet.

20. One 20 amp circuit per machine is recommended for 120V installation. One dedicated circuit per machine is recommended for 220-240 V and 100 V installation. Consult            your local electrical codes for proper installation.

21. CAUTION: Turn power off or unplug the machine before touching movable parts. Shut off power switch at night or whenever machine will be left unattended.

SAVE THESE SAFETY INSTRUCTIONS

• • The Vitamix blender’s U.S.A. power cord comes equipped with a three-prong (grounding) plug which mates with a standard three-prong wall outlet (Figure A). This cord will vary for countries outside the USA.
  • Do not cut or remove the third (ground) prong from the plug or power cord.
  • Consult your electrician if you are not sure if the wall outlet is grounded through the building wiring.

WARNING!

Do not leave blender unattended when in use.

Turn power off or unplug the machine before touching movable parts. Shut off power switch at night or whenever machine will be left unattended.

If you detect a change in the sound of the machine or if a hard or foreign object comes into contact with the blades, do not serve the drink. Inspect your blade assembly for loose, nicked or missing parts. If parts are loose, missing, or nicked, replace with new blade assembly.

When processing hot liquids:

• Do NOT expose the container to temperatures over 210°F (99°C).
• Do NOT expose the container to hot liquids or ingredients over 210°F (99°C).

Use caution. Escaping steam or splashes may scald. Never start on the highest speed when blending hot ingredients. Three-prong adapters are not to be used in Canada.

IMPORTANT NOTES!

THE INSTRUCTIONS APPEARING IN THIS USE AND CARE MANUAL CANNOT COVER EVERY POSSIBLE CONDITION AND SITUATION THAT MAY OCCUR. COMMON SENSE AND CAUTION MUST BE PRACTICED WHEN OPERATING AND MAINTAINING ANY APPLIANCE.

WaRRanty

LIMITED WARRANTY

In order to maximize the life and keep your Vitamix® product in good working order, it is important that you follow a few simple maintenance

1. t.ips: Periodically inspect the drive socket for visible wear and tear, cracks, or brakes to the socket. If damage is found, replace the drive socket with the extra drive socket enclosed with your blender. To purchase additional replacement drive sockets contact Vitamix at 1-800-437-4654 (1-800-4DRINK4) for a dealer near you. For customers outside the U.S.A., contact your authorized Vitamix Distributor, or call the Vitamix International Division at +1.440.782.2450 or email international@vitamix.com for a distributor near you.
2. Manually rotate the blade bearing assembly to make sure it turns without hesitation or doesn’t spin too freely. If the blade hesitates or spins too freely, contact Vitamix at 1-800-437-4654 (1-800-4DRINK4) for warranty information or a dealer near you. For customers outside the U.S.A., contact your authorized Vitamix Distributor, or call the Vitamix International Division at +.440.782.2450 or email international@vitamix.com for a distributor near you.
3. Never run the machine without the centering pad properly placed on the base. Vita-Mix® Corporation (hereinafter “Vita-Mix”) warrants to the original end-user (proof of purchase required) purchased in the U.S.A., that this Vita-Mix blender (hereinafter the “Equipment”) is free from defects in material and workmanship for the warranty periods applicable to the Equipment as described herein and subject to the conditions set forth below.

Motor Base

Vita-Mix warrants to the original end-user that:

• • If the motor base fails within thirty (30) days from the date of purchase, Vita-Mix will replace the motor base without charge.
  • If the motor base fails after thirty (30) days but within one year from the date of purchase, due to a defect in materials or workmanship, Vita-Mix will assume the cost of all parts and labor necessary to repair the motor base.
  • If the motor base fails after one year but within three (3) years from the date of purchase due to a defect in materials or workmanship, Vita-Mix will assume the cost of the parts deemed necessary to repair the base.

Container, Lid, Blade Assembly, Drive Socket and Sound Enclosure

(if included)

The container, lid, blade assembly, drive socket and where included a Vita-Mix manufactured sound enclosure, are warranted against defects in material and workmanship for one year from the date of purchase.

Conditions

• • The warranties contained herein run only to the original end-user and are not transferable. To make a warranty claim, proof of purchase is required.
  • This warranty is the sole remedy of the purchaser and sets forth the only obligations of Vita-Mix and does not cover normal wear-and-tear, abuse, misuse, negligent use, alteration of the base or container (or the sound enclosure), or exposure to extreme conditions and is only valid if the Equipment is used in accordance with the accompanying instruction booklet (which may also be accessed at www.vitamix.com/foodservice).
  • If applicable, improper installation or ventilation in the case of the in-counter model of the Equipment, or placing the Equipment in a sound enclosure not manufactured by Vita-Mix will void this warranty.
  • This warranty is void in the event that repairs to the Equipment are performed by someone other than Vita-Mix or an authorized Vita-Mix Service Center. Vita-Mix will not be responsible for the cost of any unauthorized repairs.
  • The sole obligation of Vita-Mix under this warranty is to repair or replace the warranted part or parts as determined exclusively by Vita-Mix.

In no event, whether based on contract, indemnity, warranty, tort (including negligence), strict liability or otherwise, shall Vita-Mix be liable for any special, indirect, incidental or consequential damages whatsoever including, without limitation, loss of profit or revenue. The above limited warranty is your exclusive remedy, and you and Vita-Mix hereby expressly disclaim all other warranties or conditions, express or implied, statutory or otherwise, including any implied warranty of merchantability and any implied warranty of fitness for a particular purpose, and, without limiting the generality of the foregoing, you and Vita-Mix hereby expressly exclude, to the extent permitted by law, the application of any sale of goods legislation and the United Nations Convention on Contracts for the International Sale of Goods, as may be applicable.

Some jurisdictions do not allow a limitation on implied warranties or on special, incidental or consequential damages.

No employee of Vita-Mix or any other person is authorized to make any warranty in addition to or amendment of the warranties made herein. For warranty details for machines purchased outside the U.S.A., contact your authorized Vita-Mix distributor, or call the Vita-Mix International Division at +1.440.782.2450 or email international@vitamix.com for a distributor near you. In the event your Vita-Mix blender needs service or repair covered by the terms of this warranty, please call the Vita-Mix Corporation for warranty assistance. For machines purchased in the

U.S.A., call Vita-Mix Technical Support: 800-886-5235. If purchased outside the continental U.S.A., contact your authorized Vita-Mix Distributor, or telephone the Vita-Mix International Division at +1.440.782.2450 or email international@vitamix.com for a distributor near you.

Customer is responsible for in-bound freight costs for warranty service.

How to Obtain Warranty Coverage and Repair

Who to Contact For Warranty Service and Repair. In the event your Vitamix blender needs service or repair covered by the terms of this warranty, please call the Vita-Mix Corporation, an authorized service center or a local distributor for warranty assistance.

• • For Equipment purchased and located in the US and Canada, call Vitamix Customer Service at: 800-437-4654.
  • For Equipment purchased outside the continental U.S.A.: Contact your authorized Vitamix Distributor or the Vitamix International Division at +1 (440) 782.2450 or email international@vitamix.com for a distributor near you.

You will be asked to provide proof of purchase for the Equipment. If the remote technical support team cannot fix the Equipment remotely, the Equipment will need to be serviced. The team will help you either locate an authorized service center or arrange for the Equipment to be shipped back to Vitamix.

How to Ship the Equipment to Vitamix for Service

1. Obtain a Return Authorization Number Before Shipment. Do not return or send in Equipment without the approval from Vitamix. Under no circumstances will Vitamix be responsible for the cost of any unauthorized repairs. All Equipment returns must have the Return Authorization Number (“RA”) clearly marked on the outside of the box. Any Equipment that is sent to Vitamix without prior authorization or approval will be returned to the shipper’s address “as is” without repair.
2. Properly Package The Returned Item. Any item sent to Vitamix must be sent in original or sufficient packaging.

geneRal inStRuctionS

Instructions for using the Pre-Set Program Buttons

The following is the basic settings of the six Pre-Set buttons for Touch & Go® Advance. These programs, numbered 1 through 6, are blending cycles designed for the most commonly made drinks. Depending on the viscosity of the drink you are creating, selecting one of the Pre-Set programs will run the machine for a full cycle. The machine will stop by itself when the cycle is complete. A cycle varies in speed and length. Your machine’s Pre-Set options may differ due to program revisions or due to the difference of recipes, your results may also vary.

BUTTON 1: Single Thin– (50/50 ratio liquid to ice) 15 seconds

BUTTON 2: Double Thin – (50/50 ratio liquid to ice) 21 seconds

BUTTON 3: Single Smoothie – (50/50 ratio frozen fruit or ice to liquid) 26 seconds BUTTON 4: Double Smoothie – (50/50 ratio frozen fruit or ice to liquid) 30 seconds BUTTON 5: Hard Pack Shake – (25% liquid to 75% ice cream by finished yield) 25 seconds BUTTON 6: Hard to Blend – (50% more frozen fruit or ice to liquid) 35 seconds

Blending Tips

1. Place liquids and soft foods in the container first, solid items and ice last. Although not necessary for processing, you may want to cut or break food into smaller pieces for more precise measuring of ingredients. Thawed or partially thawed fruit is recommended.
2. As a general rule, compared to other blenders, you do not need as much ice to make an equally frozen drink in the Touch & Go® Advance. If your recipe freezes up, try reducing the amount of ice.
3. Set the container on the motor base by aligning it over the centering pad anchored to the base. (Motor must be completely stopped before positioning container.) Containers are not to be used for hard, dry materials. Avoid running your machine with the container empty.
4. Always use a lid that is securely attached when blending.
5. Plug the machine into the nearest outlet (if unplugged). Press the On/Off switch to on. Select desired programmed setting by pressing any of the Pre-Set buttons 1 through 6. The machine will immediately begin to cycle through the selected program and turn off when the program is complete. (NOTE: Each button has a different pre-selected combination of speed and length for blending.)
6. Once one of the six Pre-Set program buttons is pushed, the machine will start and stop automatically. By pressing another Pre-Set button, the machine will stop the blending cycle.
7. When the cycle is complete, the blender stops. Wait until blades come to a complete stop before removing the lid and/or container from the motor base.
8. Remove the container, pour, garnish and serve the drink.
9. Press the On/Off power switch to off when not in use.

Maintenance Tips

• • Never bang the container against a surface to loosen the ingredients. Remove the container from the base and use a rubber spatula to remove thick mixtures from the bottom of your container.
  • Never shake or rattle a container while in use.
  • Never remove the container before the machine has come to a complete stop.
  • Never start the motor before the container is in place.

IMPORTANT NOTES!

• Check your blades daily for loose, nicked or missing parts. If you find something is loose, nicked or missing, replace the blade assembly before use. Do not tighten the acorn nut (on top of blade assembly). If loose, replace blade assembly immediately.
• The instructions appearing in this Use and Care Manual cannot cover every possible condition and situation that may occur. Common sense and caution must be practiced when operating and maintaining any appliance.
• When the thermal protector shuts the motor off, review your processing techniques and your instructions. Your recipes may be too thick or have too much material in them. Consider adding more liquid and consult Vitamix® Customer Service or your local Vitamix Distributor for further assistance.

contRol panel

On/Off Power Switch: Located on the back of the motor base, the On/Off switch controls the power to the machine. While plugged in, switch to on to ready the machine for blending. Shut off the power switch at night or whenever the machine will be left unattended.

Pre-Set Program Buttons: These buttons, numbered 1 through 6, are pre- programmed blending cycles designed for the most commonly made drinks. Depending on the viscosity of the drink you are creating, pressing one of the six Pre- Set program buttons will run the machine for a full cycle. The machine will stop by itself when the cycle is complete. A cycle varies in speed and length. Each button can be reprogrammed to any recipe through custom programming or by reprogramming to any of the 20 available recipes. Due to difference of recipes, your results may vary.

Display Window: This area, depending on which button is pressed, displays a variety of operation messages. A “Ready” message appears when there is power to the machine.

IMPORTANT NOTES!

Start/Stop Button: Pressing one of the Pre-Set program buttons, while the motor is running, will stop the machine.

Pulse Buttons: The pulse provides a quick increase or decrease in speed of the blade when blending or refreshing a drink. Press

to pulse at 80%. Press to pulse at 20%. The Pulse button will override the running program as long as it is Pressed. Once released, the original program continues its cycle.

Owner Controls:

While pressing Button 2, turn on the power switch. Continue to press Button 2. The unit will cycle through the following screens:

1. 
2. 
3. 

4. Motor Life Timer

When the fourth screen is displayed and button 2 is released and pressed within 12 seconds, the following screens will display.

Press button 2 to exit out of these screens to return to machine ready.

pRogRamming

The Touch & Go® Advance is pre-programmed with an Advance program which is optimized for the Advance container. The program can be customized by using the control panel, or a programming chip or programmer software kit available from Vitamix®. Call your distributor or customer service for more information.

Programming Pre-Set Buttons

1. Access the 20 stored programs by activating the power switch located on the back of the motor base while pressing button 1. The display will say “BUTTON SET UP”, quickly release.
2. Press the or buttons to scroll through the “Recipe” numbers until you reach the one you want.
3. Press the Pre-Set button that you want to program for the recipe selected.

For Example: If you wanted to program button 1 with recipe #17:

1. After accessing the stored programs as described in step 1, the display window will say “BUTTON SETUP.”
2. Press the Pulse button until the screen displays “Recipe 17.”
3. Press the 1 button to apply Recipe 17.
4. Either continue programming the other five buttons or turn machine off to exit.

Resetting the Pre-Set Buttons to the original factory settings

1. Access the Owner Controls by activating the power switch located on the back of the motor base while pressing button 2. Continue to press button 2.
2. Once the unit powers up, it will cycle through four screens then stop on the motor status screen. Press button 2 again, within 12 seconds, to scroll through the menu settings.
3. Scroll using button 2. The screen will display “1 TO OVERWRITE CURRENT PROGRAM”. Press button 1 to reset to the original factory settings.

Recipe Options Arranged by recipe number (#) and drink type:

       #                         DRINK TYPE                                                                                                                                           DESCRIPTION                                                                                                                             RUN TIME

The following programs are designed to be used with the Vitamix Aerating Container (sold separately). Contact your local Vitamix Dealer/ Distributor to puchase the Aerating Container. Contact Vitamix Customer Service directly for availability and product information.

machine aSSembly

Cover Door

1. Lift the handle to open the cover. Gently spread the sides of the door over the round hinges and remove.
2. To reinstall the cover door, gently spread the sides of the door and place the door hinge cutouts over the round hinges.

IMPORTANT NOTES!

Containers:

• Touch & Go® Advance machines are optimized for use with the Vitamix® 32 oz. / 0,9 L Advance container (3 sided container). The 64 oz. / 2,0 L standard container will not fit in the compact cover used on the Touch & Go® Advance. Contact Vitamix customer service at 800-886-5235 or contact your distributor for more information.

• Outside the United States and Canada, your machine may come with a different container configuration.

Two-Piece Lid (Figure A)

32 oz. / 0,9 L Advance Container

The two-piece lid is easy to clean and easy to put on, take off and seal.

• • • To remove a fully latched lid, lift the two tabs and pull upward and off.
    • Twist the center lid plug to fasten or remove.
    • To secure lid plug, rotate it so one tab locks between the notches on top of rubber lid.

One-Piece Lid (Figure B)

32 oz. / 0,9 L Advance Container

The one-piece lid is easy to clean and easy to put on, take off and seal.

• • • There is no lid plug for this lid.
    • Ingredients can be added through port on top.

Blade Assembly

Blade Agitator Assembly: The blade assembly includes a precision-hardened stainless steel blade with enclosed double sealed steel ball bearings for maximum durability. The rugged blade assembly literally explodes molecules of food and ice in the container, helping every batch to homogenize more effectively. The blades do not need to be removed for normal cleaning.

Drive Spline: Inserts into drive socket on the motor base to turn the blade.

Note: Removing and replacing your container while the drive socket is still rotating will strip the drive spline “teeth.” (This part is NOT removable.)

Retainer Nut: Must be tight.

Removal

Note:

To remove the cover, pressure will be at two points to disengage the cov locking tabs on the motor plate.

To remove the twist lock sound enclos

1. Remove the compact cover d prevent it from closing unexp Lift the handle to open the cover. spread the sides of the door over th hinges and remove.
2. Lift up on the front of the centeri and peel away from the motor b it up and over the drive socket to r (See Figure A).
3. Grasp the bottom frame cover with two hands as sh (See Figure B).

4. With equal pressure and in one motion, use the index finger of your left hand to apply pressure at the back of the cover frame while at the same time apply pressure with your right thumb to unlock and twist the cover away from center in a counter- clockwise direction (See Figure C).

5. If necessary, continue applying pressure at these two points until the cover is free and can be separated from the motor base (See Figure D).

6. Once disengaged, lift the cover up and away from the blender base (See Figure D).

Note: See Figure E for an example of the motor base with the twist lock compact cover removed.

Twist Lock Compact Cover Installation

1. Put the twist lock compact cover on top of the blender base. Align the four locking tabs on the motor adapter plate with the openings on the compact cover. (See Figure A).
2. Twist the compact cover clockwise on the motor base to lock it in place. (See Figure B).

3. Align the rail guides on the centering pad with the slots between the compact cover and the motor adapter on the motor base (See Figure C).

4. Put the centering pad in place on the motor base in the proper alignment. (See Figure D).

Note: The centering pad MUST be used on the motor base during use to keep the twist lock compact cover in place. DO NOT use the machine without the centering pad.

5. From the back of the motor base working towards the front, apply pressure on the centering pad to push it into position on the motor base, making sure that the centering pad is completely seated under the drive socket. (See Figure E).

1. To reinstall the cover door, gently spread the sides of the door and place the door hinge cutouts over the round hinges. (See Figures F and G).

                    FIGURE F

                  FIGURE G

caRing foR youR machine

IMPORTANT NOTES!

Cleaning Products: Do not use abrasive cleaning agents or concentrated bleach when cleaning. Do not use any of the following cleaning products: automatic dishwashing detergents, oven cleaners, steel wool or other abrasive pads.

Cover: Do not wash cover door, handle or back cover in dishwasher. It is recommended that the handle not be disassembled during cleaning. However, if you choose to disassemble the handle from the cover, make sure to not over-tighten it when reattaching it to the cover. Doing so will cause damage.

Container: Do not let mixtures, liquids or food products dry in the container. Rinse after use. Dry product may lock around the blade and weaken/tear the bearings seal when restarted. Do not place containers in the freezer. Extremely low temperature combined with hot ingredients and/or the immediate rapid action of the blade may crack the container. Microwaving and automatic dishwashing are not recommended.

Blade Assembly: Do not soak the blade agitator assembly.

* Be sure to uplug the blender and wring excess water out of cloth or sponge when cleaning around the controls or any electrical part.

** Recommended sanitizing solution: 1.5 tsp. / 7,4 ml institutional or household bleach in 2 qt. / 1,9 L water.

Motor Base/Control Panel: Unplug the power cord and gently wash the outside surface with a damp soft cotton cloth moistened with a mild solution of warm water* and nonabrasive detergent or nonabrasive liquid spray cleaner. Be careful to not scratch or scrub the display window on the control panel. Never immerse motor base in water or other liquid. Dry with a soft cotton cloth.

Lid: Wash in warm, soapy water. Rinse clean under running water and dry.

Cover Door: The cover can be removed and cleaned by placing under running water and washing with a soft cloth. Wipe dry and replace back on the base.

Container Centering Pad: Remove the centering pad. Wash the pad in warm, soapy water. Rinse clean under running water and dry. Reassemble before use. Replace the sound enclosure. The centering pad should be flat on the motor base.

Container: The Advance container has been designed to be chemical resistant. However, for maximum container life, hand washing is recommended.

To Clean: Wash all container parts in warm soapy water. Rinse and drain. Do not soak the blade assembly.**

To Sanitize: After all solid residue is removed, fill container 3/4 full with a sanitizing solution mix.*** Return container to motor base and firmly position the two-piece lid. Run machine on a high speed for 30 seconds. Turn machine off and allow mixture to stand in the container for an additional 1 1/2 minutes. Pour out contents. Return container to motor base and run machine empty for an additional 5 seconds. Do not rinse after sanitizing. Allow container to air dry.

tRoubleShooting

                                                                            Problems:                                                                                                      Possible Actions: